Filter
Top Products
8
[002] System Speed Dialing Name Set (Additional)
Description
Assigns names to the system speed dialing numbers assigned in program [001] System
Speed Dialing Number Set. Display telephones can show the stored number during System
Speed Dialing.
Selection
• Speed dial number: 000 through 499
• Name: 10 characters (max.)
Default
All speed dial numbers — Not stored
Programming
1. Enter 002.
Display: 002 SYS SPD NAME
2. Press NEXT.
Display: SPD Code?
3. Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000:Not Stored
4. Enter a name.
For entering characters, please refer to “1.4 Entering Characters” in the Programming Guide
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or SELECT and the
desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Speed dial numbers are programmed in program [001] System Speed Dialing Number Set.
• Each name has a maximum of 10 characters.
•
To go to another speed dial number in steps 3 through 6, press
SELECT
and start with step 3.
Feature Reference — in the Features Guide
System Speed Dialing
Programming Guide