Panasonic KX-NT265 IP Phone User Manual


 
Location of Controls
LCD (Liquid Crystal Display)
Microphone: Used for the hands-free
conversation.
VOLUME Control Button: Used to
adjust the volume.
HOLD: Used to place a call on hold.
SP-PHONE (Speakerphone): Used for
the hands-free operation.
Flexible Outside (CO) Line Buttons:
Used to make or receive an outside call.
Pressing this button seizes an idle
outside line automatically. (Button
assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
TRANSFER: Used to transfer a call to
another party.
REDIAL: Used to redial the last dialled
number.
MESSAGE: Used to leave a message
waiting indication or call back the party
who left the message waiting indication.
FLASH/RECALL: Used to disconnect
the current call and make another call
without hanging up.
INTERCOM: Used to make or receive
intercom calls.
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone/handset during a
conversation.
PROGRAM: Used to enter and exit the
personal programming mode.
AUTO DIAL/STORE: Used for
System/Personal Speed Dialling or
storing programme changes.
Setting
Ringer volume
While on-hook or receiving a call
Press UP or DOWN.
Ring Tone
OR
0 1
0 8
Press Twice.
AUTO DIAL
STORE
(CO)
INTERCOM
*
The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
*
0 1
While on-hook
LCD Contrast/Headset Mode
6
1
LCD Contrast
Headset Mode
Press UP or DOWN.
AUTO DIAL
STORE
AUTO DIAL
STORE
15
14
PROGRAM PROGRAM
PROGRAMPROGRAM
Headset Jack
14
1515
1616
16
Message/Ringer Lamp: When you
receive a call, the lamp flashes red.
When someone has left you a message,
the lamp stays on red.
7