Panasonic KX-TG9333 Telephone User Manual


 
Making/Answering Calls
18
For assistance, please visit http://www.panasonic.com/help
Press {C} on the handset, then
press { SP-PHONE} on the base
unit.
If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press {^} or {V} repeatedly while
talking.
Redialing the last number dialed
{SP-PHONE} i {REDIAL}
Answering calls
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 25.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 26).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing {OFF}.
Adjusting the base unit ringer
volume
Press {^} or {V} repeatedly to select the
desired volume.
L To turn the ringer off, press and hold
{V} until the unit beeps 2 times.
Using the base unit
When a call is being received, the IN
USE indicator flashes rapidly.
1 Press {SP-PHONE} when the unit
rings.
2 Speak into the MIC.
3 When you finish talking, press {SP-
PHONE}.
Available for:
KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
TG93XX_OI.book Page 18 Thursday, December 27, 2007 3:38 PM