Filter
Top Products
Programming
26
For assistance, please visit http://www.panasonic.com/help
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700ms” unless pressing
{FLASH} fails to pick up the waiting call.
*7 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*8 This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
TG63xx_OI.book Page 26 Thursday, January 10, 2008 9:02 AM