Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/help 43
Making/answering calls, intercom
*1 KX-TG3031/KX-TG3032/KX-TG3033/KX-TG3034
Problem Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
LMove the handset and base unit away from
other electrical appliances.
LMove closer to the base unit.
LTurn on the clarity booster feature (page 17).
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring. LThe ringer volume is turned off. Adjust it (page
24).
The base unit does not
ring.
*1
LThe ringer volume is turned off. Adjust it (page
16).
I cannot make a call. LThe dialing mode may be set incorrectly.
Change the setting (page 14).
LAnother handset is in use. Try again later.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is
connected properly (page 38).
LIf “SP-phone” is displayed on the handset,
press {C} to switch to the headset.
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the handset. LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.
I cannot page the base
unit.
*1
LThe base unit is in use. Try again later.
TG30xx.book Page 43 Thursday, February 1, 2007 5:19 PM