Filter
Top Products
Programming
31
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*2 KX-TG2632
*3 This tone lets you know when you receive a call while you are on an intercom call. If you
select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the
tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*6 The recall time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary.
The setting should stay at 600 ms unless pressing {Recall} fails to pick up the Call
Waiting call.
*7 If the caller ID time and date display service is available in your area, this feature allows
the unit to automatically adjust the date and time setting when caller information is
received. To use this feature, set the date and time first.
Ringer volume (Handset) {1}{1}{1}: Low {2}: Medium
{3}: <High> {0}: Off
–
Set area code {0}{4} (page 26) –
Set dial mode {0}{5}{1} (page 47) r
Set line mode
*5
{0}{5}{3}{1}: A {2}: <B> r
Set recall time
*6
{0}{5}{2}{1}: 700ms {2}: <600ms>
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
r
Time adjustment
*7
(Caller ID subscribers only)
{0}{9}{1}: <Caller ID[auto]>
{0}: Manual
r
Voice enhancer {5}{1}: On {0}: <Off>–
Feature Feature
code
Setting code System
setting
TG2631NZ_2632NZ.book Page 31 Monday, March 13, 2006 9:25 AM