Filter
Top Products
– 4 –
Registering a handset to the base unit
1
Base unit:
NKX-TGP500 series
Press and hold {ALL} for about 4 seconds until the STATUS
indicator flashes in red.
NKX-TGP550 series
Press and hold {ALL} for about 4 seconds until the registration tone
sounds and the STATUS indicator flashes in red.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
LThe next step must be completed within 90 seconds.
2 Handset:
{OK
L
}
3 Wait until “Enter Base PIN” is displayed. i Enter the base unit
PIN (default: “0000”). i Press {OK}, then wait until a long beep
sounds.
LIf you forget your PIN, contact your phone system dealer.
Note:
LIf an error tone sounds, or if _ is still displayed, register the handset
according to the registering section of the base unit’s User Guide on
the Panasonic Web site. See page 1 for Panasonic URL.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299