Filter
Top Products
56
Problem
You cannot redial by
pressing (REDIAL/PAUSE).
“Recharge” is displayed,
“” flashes or the unit
beeps intermittently.
You charged the battery
fully, but “Recharge” is still
displayed and/or “”
continues to flash.
The IN USE/CHARGE/HOLD
indicator light does not go
out after the battery has
been charged.
You cannot have a
conversation using the
headset.
If you cannot solve your
problem
Remedy
•If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
•The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a call (p. 23). If another
number has been dialed first, it will
operate as a pause button (p. 47).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install a new battery (p. 52).
•This is normal.
•Make sure that an optional headset is
connected properly (p. 49).
• may have been pressed.
If “SP-phone” is displayed on the
handset, press to continue the
conversation with the headset.
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
Troubleshooting