Filter
Top Products
53
For assistance, please call: 1-800-211-PANA(7262)
Advanced Operation
“
3
Press (fl) (Yes key).
4
Scroll to “Save VM access#” by pressing
(›) or (‹).
5
Press (fl) (Yes key).
6
Enter your access number, up to 32 digits.
≥You may enter pauses* (see below).
≥Each time you press
(CLEAR/INTERCOM/HOLD), a digit is erased.
To erase all of the digits, press and hold
(CLEAR/INTERCOM/HOLD).
≥To move the cursor, press (fi) or (fl).
7
Press (›) (Next key).
≥If you want to edit the entered number, press
(‹) (Edit key) and return to step 6.
8
Press (fl) (Save key).
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
*
For quick access to your voice mail box by using
(FLASH/CALL\WAIT/VOICE\MAIL) or (VM), you may add pauses between your
voice mail box access number and your mail box password in step 6.
Ex. 1-222-333-4444 PPP 8888
Pressing (REDIAL/PAUSE) once creates a 3.5 second delay and counts as
one digit. The delay time depends on a telephone company.
Your voice mail box access number
Your mail box
password
Pauses
To erase a stored number
Repeat steps 1 through 5 ¤ press and hold (CLEAR/INTERCOM/HOLD)
until all of the digits are erased ¤ (›) (Next key) ¤ (fl) (Save key).
≥A beep sounds.
1234567PPP8901
21
4
=Next
1234567PPP8901
3
=Edit
1
=Save
1234567PPP8901
Save VM access#
1
Set flash time
Set line mode
43
1
=Yes
21
4
=Next
1
Save VM access#
VM tone detect
43
1
=Yes