Filter
Top Products
11
7.3 Storing numbers in Memory locations 0-9
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits). Press STORE
button.
3. Enter the name (up to 16 characters) . Press the corresponding number
button one or more times for the first letter (see the above table). Press
STORE button.
4. Press either 0-9 to store the number.
7.4 Dialling numbers in Memory locations 0-9
1. Lift the handset or press SPEAKER button and wait for a dialling tone.
2. Press MEM button.
3. Select a memory location by pressing the relevant keypad digit 0-9.
8 Caller ID
Caller ID allows you to see who is calling before you answer a call and to
see who has called in your absence. If the number is stored in the indirect
memory, its associated name will be displayed instead. The CID memory
will store up to 32 name/telephone numbers stored chronologically. The
sequence number is shown in the top right-hand side of the display.
When the memory is full, the oldest number will be deleted automatically as
the new call is logged. New calls are indicated in plain text in the display and
flashing of the red New Call indicator light.
Please note!
In order for numbers to be shown, the Caller ID service must be provided by
your network operator and a current subscription in place. Contact your
telephone service operator for more information.
8.1 Retrieving and dialling CID numbers
1. Press CID button to select caller-id mode.
2. Press either or
to review the numbers stored in the Caller ID memory.
3. To dial a displayed telephone number either press CALL BACK OR
SPEAKER
,
the displayed telephone number will now be dialled. If you do
nothing the phone will return to standby mode.