Filter
Top Products
14
15
Connecting the antenna
Align the base of the antenna onto the SMA connector and turn
clockwise until snug. Do not over tighten.
To disconnect antenna:
Turn the base of the antenna counter clockwise until it comes out
from the SMA connector.
Connect the battery.
Connect the belt clip.
Turning your radio on and off
To turn on the power:
Rotate the PWR/VOL knob clockwise until “beep” is heard. All
icons and frequencies will appear on the screen.
To turn off the power:
Rotate the PWR/VOL knob counterclockwise. All displays will
disappear and the radio is off.
Adjusting the volume
Rotate PWR/VOL while holding down the MON/FUNC key until
you reach a comfortable listening level.
Basic Operations
Rotate PWR/VOL clockwise to increase the volume or
counterclockwise to decrease the volume.
Backlight
Depress the PTT key or wait for 5 seconds to inactivate
the backlight.
Monitor
Do not talk on a channel if someone else is talking on it.
To check for activity on a channel before you talk, press and hold
the MON/FUNC key.
If you hear static, the channel is clear to use.
To exit the function, release the MON/FUNC key.
Selecting the channel
The radio has 10 pre-programmed (see pre-programmed
frequency table on page 23) channels to use and can be
programmed up to 32 channels. You can press UP or DOWN
to select a channel.