Filter
Top Products
MODELS NM200 • NC300
Page 3
5. Ifyoudon’twanttoassignapresetnumber,wait5seconds
and your selected radio station will automatically be assigned
tothepresetnumberthatisdisplayed.Ifyouwanttoselect
thepresetnumber,pressthePRESETbuttonrepeatedlyto
cyclethroughnumbers1-8untilyoureachthepresetnumber
you want.
6. Wait5seconds.Thedisplayupdatestoshowthenewstation
for the selected preset number.
Note: This activity can be cancelled at any time during
the process by pressing TUNE UP and TUNE DOWN
simultaneously again, and no new preset is stored.
Scan Mode
Twoscanmodesareavailable.Thescanmodefortheroom
stationsissetatthemaster.Thetwoscanmodesareidentied
below. To set your scan mode:
• Scan1—AllowstheIndoor/OutdoorRemoteStationstoscan
throughthefourmusicsources(AUX,AM,FM,CD).Onradio
bands AM and FM, Scan 1 scans through the preset radio
stations: AM 1-8 and FM 1-8. See Music Settings/Radio
Settings for information on how to preset radio stations.
• Scan 2—Allows Indoor/Outdoor Remote stations to scan
through the four music sources(AUX, AM, FM, CD.) On
radio bands AM and FM, Scan 2 scans all strong stations
beforemovingontothenextsource.
To set the Scan Mode:
To change the scan mode, simultaneously press and release
PRESETandSOURCEagain.ThedisplayshowseitherScan1
or Scan2.
Note:ExitoutofscanmodebypressingPRESETandSOURCE
orwaitingforthedisplaytoshowtheclocktimeagain.
AUDIO SETTINGS
Volume
• Music—Adjuststhevolumeforsystemmusic.
• MasterStation—Adjuststhevolumeforthespeakeronthe
Master Station only.
• Intercom—Adjuststhevolumeforthesystemintercom.
Preset Radio Stations
To preset radio stations:
1. PressPOWERtoturnonthemusic.
2. Select FM or AM. See Music Settings/Music Source for
instructions.
3. UseTUNEUPorTUNEDOWNtondastation.SeeTune
theRadiosectionforseekandscanfunctions.
4. SimultaneouslypressTUNEUPandTUNEDOWNtoenter
Store Preset mode. The display shows PRESET and a
preset number.
Tone
• Loudness
• Treble
• Bass
Tochangevolumeandtonesettings:
1. Press POWER to turn on music. The system defaultsto
musicvolume.UseVOLUMEUPandVOLUMEDOWNto
adjustthemusicvolumefrom0-29.Allotheraudiosettings
returntomusicvolumeafter5seconds.
2. Press TONE. Master Volume appears. This controls the
volumefortheMasterStationspeakeronly.UseVOLUME
UPandVOLUMEDOWNtoadjusttheMasterVolumefrom
0-29.