Filter
Top Products
28 Chapter 4 Configuring the handset settings
NN40110-110NN40110-110
Setting the message LED
Complete this procedure to have the message LED flash when you receive a voice message, or to
turn off this option.
Turning the message LED on or off
1 In programming mode, scroll to the Message LED menu.
2 Press
Select.
3 To turn the message LED on, scroll to the On option and press
Select.
4 To turn the message LED on, scroll to the Off option and press
Select.
Setting the duration of the backlight
Complete this procedure to set the length of time the backlight remains on after you have
completed a call or other action on the handset. The longer duration you select for the backlight,
the less talk time and standby time you have.
Setting the duration of the backlight
1 In programming mode, scroll Back Light.
2 Press
Select.
3 Scroll through the duration options (shown in 10-second increments) to the length of time you
want the backlight to remain on.
4 Press
Select.
Setting volume and tones
Complete the following procedures to
• turn key beeps on or off
• set the ring and vibration options
• select a ring type
• select a ring volume
• select a noisy location level
Setting key beeps
1 In programming mode, scroll to the key Beep menu.
2 Press
Select.
3 Scroll to the
On option to turn on key beeps.