Filter
Top Products
2
Your Norstar M7310 telephone
Using display
buttons
Display buttons change with each feature you use.
The labels for display buttons appear in capital
letters directly above them on the second line of
the display. A display button with an “OK” label
above it is represented as
in this card.
Confirm that your memory and line buttons have the correct snap-on caps by
checking their programming.
1. Release all calls or open lines with dial tone.
2. Press .
3. Press the button(s) you want to check and read the display.
4. Press ␣ when finished.
1. Press .
2. Press
or for the level you want.
3. Press
when finished.
1. Press .
2. Press , , or to hear the different types of rings.
3. While the telephone is ringing, press to adjust the volume.
4. Press to store the ring.
Shift button
for using the top function of a dual-memory button.
Display
shows the time, date, call information and guides you while using Norstar* features.
The lower line of the display is reserved for display button instructions.
Dual-memory buttons
store any two features and/or autodial numbers.
Display buttons
Feature button
starts or cancels a feature.
Release button
cancels active calls.
Hold button
Dial pad
Memory and line buttons
are buttons with indicators for
one touch dialing, feature
operation or line access.
Volume control
Indicators
appear beside active lines and features.
Button inquiry
Adjusting display
contrast
Selecting a ring type
and volume level
softer louder
* Meridian and Norstar are trademarks of Northern Telecom.
Important: All M7310 telephones Release 16 (REL 16) and higher comply with the Americans with Disabilities Act
(ADA). See the label on the bottom of the telephone for the Release marking.