Nortel Networks M2006 Cordless Telephone User Manual


 
33
Call Park
Call Park allows a call to be held temporarily, then to be retrieved from any other
DN. You can park an incoming call and then page the called party, without tying
up a line. Your office may have a System Park DN where most calls are
automatically parked.
If configured networkwide, Call Park can be used across networks.
To park a call on the System Park
Extension or your own
DN:
¢
¢
Press Park twice. If there is a System Park
DN, the call is parked on it. Otherwise, it is
parked on your DN.
Note: for MSL-100 Press Park once and
the call is parked
To park a call on a DN other than the
System Park Extension or your own
DN:
¢
1. Press Park.
2. Dial the DN.
¢
3. Press Park again.
Note: MSL-100 uses Directed Call Park
(DCPK)
To park a call using the SPRE code
or FFC
:
or
ø
1. Press Transfer or Conference.
2. Dial the SPRE code followed by
‡⁄
‡⁄‡⁄
‡⁄
, or enter the Call Park FFC.
3. If you don't want the System Park
Extension or your own DN, Dial a DN.
or
ø
4. Press Transfer or Conference again.
Note: MSL-100 uses Conference only.
During a call: Call Park