Filter
Top Products
Chapter 2 Features and buttons 13
IP Phone 2002 User Guide
• Press to activate the headset mode. When the light is on, press a line or
intercom button to make a call.
• To switch to your headset when you are on a handset call, press and replace the
handset. Lift the handset to switch back.
• To switch to your headset when you are on a Handsfree call, press . Press
to
switch back.
Mute
• While on a call, press to turn off the microphone. The button lights when the
microphone is off.
• Press again to turn on the microphone.
• Use on handset, Handsfree, or headset calls.
Time offset
When your IP Phone 2002 is located in a different time zone from your system, the display shows
the system time, not the local time. The Time Offset feature enables you to adjust the time that
appears on the display.
Before you begin, calculate the time difference, in hours, between the server time and local time.
To change the time that appears on your telephone display to
local time:
1 Press Feature *510.
2 Press CHANGE
.
3 Press * to switch between adding or subtracting time.
4 Using the dialpad, enter the number of hours between local time and system time.
5 Press OK
.
Note: Press # to enter half hour increments.
Note: It may take up to one minute for the change to appear on the display.