Filter
Top Products
Page 1 Enterprise Edge M7324N User Card
Your Enterprise Edge M7324N Telephone
Using Button
Inquiry
Check what is programmed on your memory buttons.
1. Release all calls or lines with dial tone.
2.
Press
ƒ•‚
.
3. Press the button(s) that you want to check and read the display.
4.
Press
ƒ
when finished.
Adjusting display
contrast
1.
Press
ƒ•‡
.
2. Press
UP
or
DOWN
for the level you want.
3. Press
OK
when finished.
Selecting a ring
type and volume
level
1.
Press
ĥfl
.
2.
Press
⁄
,
¤
,
‹
,
›
, or
NEXT
to hear the different ring types.
3.
While the telephone is ringing, press
√
to adjust the volume
level.
4. Press
OK
to store the volume level and ring.
Mounting the
telephone
The M7324N telephone can be placed on any level surface. It cannot be
wall-mounted.
Using display buttons Three display buttons appear directly below
the display. When they are active, these
buttons are labelled in capital letters on the
bottom line of the display. In Enterprise Edge
documents, display buttons are shown as
underlined, capital letters: for example,
OK
.
Display
shows the time, date, and call information; guides you while
using features; tilts for easy viewing. The lower line of the display
is reserved for display button instructions.
Display buttons
Release button cancels active calls
Dial pad
Volume control
Memory and line buttons
are buttons with labels for
one-touch dialing, feature
operation, or line access.
Hold button
Indicators
appear beside active
lines and features.
Feature button
starts or ends a feature.