Filter
Top Products
3
Making calls
About line buttons
Norstar systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
Internal calls using Intercom buttons
1. Pick up the receiver.
2. If appears beside an Intercom
button, then dial.
OR
Press an Intercom button without
, then dial.
External calls using numbered Line
buttons
1. Pick up the receiver.
2. When appears beside a
numbered Line button, then dial.
OR
Press a numbered Line button
without , then dial.
Note:
Internal numbers are supplied by your System Coordinator.
External calls using extension
buttons
1. Pick up the receiver.
2. When appears beside the
extension button, dial
(or your system's external line
access code) and the number.
Internal calls using extension
buttons
1. Pick up the receiver.
2. When appears beside an
extension button, then dial.
Holding Calls
1. Press .␣ The flashes beside the line on hold.
2. Press the line button with the flashing to return to the call.
Check the display for confirmation or additional information.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone's built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1. Press instead of picking up the receiver.
Switching between Handsfree and handset
1. Press and replace the handset to switch to Handsfree.
2. Pick up the receiver to switch back.
Using Mute
1. Press to turn the microphone OFF.
2. Press ␣ again to turn the microphone ON.
1. Press a line button without , then dial your call.
2. When answered, pick up the receiver, or press .
3. If the call is not answered, or the line is busy, press .
Line 1
4321
Dialing without
lifting the handset