Filter
Top Products
69
Additional Features
Succession Branch Office
The Branch Office telephone can operate in Normal Mode or Local mode.
Normal Mode
The telephone registers with the Main Office and receives telephone services from the
Main Office. At any time during Normal Mode you can check local mode
functionality (make and receive calls) by enabling Local Mode and returning to
Normal Mode. After testing, you can return to Normal Mode by using the Resume
Normal Mode command or by waiting for ten minutes.
Local Mode
If the WAN connection goes down the telephone loses communication with the
Main Office TPS. It then registers with the Branch Office and receives telephone
services from the Branch Office. When in Local Mode, the telephone displays
"LOCAL MODE".
Use Test Local Mode to check local mode functionality (make and receive telephone
calls). This is useful when provisioning has changed for an Internet Telephone on a
Branch Office Controller. .
1. Press the Services key to access the
Services menu.
2. Using the Navigation keys, highlight
Test Local Mode.
3. Press the Select key (The telephone
resets and registers to the Branch
Office).
Test Local Mode
Test Local Mode
Select