Nortel Networks C3050 REV2 Telephone User Manual


 
29
Installing battery
packs
Hook the hinges of the battery pack into the slots at the
bottom of your portable, and push the pack and the
portable together until the pack clicks shut.
Preparing the
charger
Connect the ac adaptor plug of the power cable to the rear
of the charger, then attach the ac adaptor to a power source.
Note: When charging your portable overnight, slide the ringer
control switch to the bottom ( ) position to extend the life of the
batteries.
Recharging the
portable and spare
pack
1. Place your portable (containing a rechargeable battery
pack) on the charger. The right-hand light indicator turns
red while charging and green when the portable pack is
recharged.
2. Insert a spare rechargeable battery pack into the smaller
rear charger slot. The left-hand light indicator turns red
when charging and green when the spare pack is
recharged.
Note: The spare rechargeable battery pack and the portable can be
recharged at the same time.
87251304.030 Page 29 Thursday, July 23, 1998 16:09