Filter
Top Products
P0908546 Issue 02 Enterprise Edge ATA 2 User Guide
Troubleshooting for Data Applications
If you are having trouble, check the following before calling a repair person:
1. Make sure the data parameters (parity, baud) are set correctly.
2. Make sure Enterprise Edge Analog Terminal Adapter 2 is in the tones OFF
mode.
3. Make sure you are dialing out on the proper line. The proper line is either an
intercom or external line. See Alternate Line on page 7 of the Feature List. To
change your prime line, see your System Administrator.
4. Substitute a single line telephone for your data communication device. If you
receive a dial tone on the single line telephone, the problem can be with the
data communication device.