Filter
Top Products
Menu functions
Messages
(Menu 5)
67
-
Connect to POP3
server first
/
Connect to IMAP4 server first
:
connect to the POP3 or IMAP4 server
before connecting to the SMTP server
to send e-mails.
-
Protocol type
: select the protocol for
the incoming e-mail server. The
remaining options depend on the
protocol type setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or
host name of the server that receives
your e-mail.
-
POP3 port
: enter the POP3 port
number.
-
User ID
: enter the POP3 user name.
-
Password
: enter the POP3 password.
-
Use SMTP authentication
: enable
SMTP authentication, which requires
the user to login before sending
e-mails.
-
Same as POP3
: select if you want the
SMTP server to have the same
parameters as the POP3 server.
-
SMTP user ID
: enter the SMTP user
name.
-
SMTP password
: enter the SMTP
password.
-
APOP login
: connect to the server by
using the APOP login scheme.
-
Email retrieval limit(1-100)
: set the
number of headers you will retrieve
from the server.
-
Secure connection
: use a secure
connection for the e-mail service.
When the protocol type is
IMAP4
:
-
IMAP4 server
: enter the IP address or
host name of the server that receives
your e-mail.
-
IMAP4 port
: enter the IMAP4 port
number.
-
User ID
: enter the IMAP4 user name.
-
Password
: enter the IMAP4 password.
-
Use SMTP authentication
: enable
SMTP authentication, which requires
the user to login before sending
e-mails.