Filter
Top Products
13Copyright © 2005 Nokia. All rights reserved.
Switch the call between phone and headset
To switch the call from the headset to a compatible phone, press and hold the
power/call key and the volume down key simultaneously until the headset beeps,
or use the respective function in your phone.
To switch the call from a compatible Nokia phone to the headset, press and hold
the volume down key. On some phones you may need to press and hold the power/
call key and the volume down key simultaneously until the headset beeps.
■ Use the headset with several phones
You can pair the headset with up to eight phones but connect it to only one phone
at a time.
If the headset is switched on within 10 meters (30 feet) of several paired phones,
the headset tries to connect to the phone that was used most recently with it.
If the headset cannot connect to the most recently used phone, it can be
connected to other paired phones within about 10 minutes. If the headset is not
connected to a phone during this time, the headset is switched off.
■ Reset the headset
If the headset stops functioning, although it has been charged, you need to reset
it. Press and hold the volume up key, and plug the charger to the headset (see
“Charge the battery” on page 7).