Filter
Top Products
Getting started
9
English
■ Charging the battery
1. Connect the charger cable to the headset as shown in Figure 3.
2. Connect the charger to an AC wall outlet. The red indicator light is
displayed during charging. Charging the battery fully may take up to
2 hours 45 minutes depending on the charger.
3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the AC wall outlet and the
headset.
When the battery charge falls low
The fully charged battery has power for up to 5 hours of talk-time and
up to 120 hours of standby time. (In standby mode the headset is
switched on but no call is in progress.).
When the battery is running out of power, the headset beeps. Charge
the battery as described above.
■ Pairing the headset with a compatible phone
1. Make sure that the compatible phone is switched on.
2. Switch on the headset. Make sure that the headset is charged.
3. Activate the Bluetooth connection from the phone. For more
information, see the user’s guide of the phone.
4. Set the phone to search for Bluetooth devices as instructed in the
user’s guide of the phone.
5. Select the Nokia HS-3W from the list.
hs-3W_en_1st_tab.fm Page 9 Tuesday, December 16, 2003 10:31 AM