Filter
Top Products
ENGLISH
1. Connect the charger cable to the
charger connector.
2. Connect the charger to the power
source. The red indicator light is
displayed while charging.
If you use a charger that is
connected to the cigarette lighter
socket, power must be supplied by
a 12-volt car battery. Ensure that
the charger is properly inserted in
the cigarette lighter socket and
does not interfere with the normal
operation of the car.
In some car models, the cigarette
lighter socket is powered by the car
battery even when you remove the
ignition key. In those cases, the car
battery might be discharged even
if the speakerphone is not used.
For more information, contact the
vehicle manufacturer.
If charging does not start, disconnect
the charger and plug it in again.
Charging the battery fully may take
up to 2 hours and 30 minutes.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
speakerphone and the power source.
The fully charged battery has power
for up to 10 hours of talk time or up
to 150 hours of standby time.
When battery power is low, the
red indicator light flashes slowly.
Recharge the battery.
Switch on or off
To switch on, press and hold the answer/
end key until the speakerphone beeps
and the green indicator light turns on.
The indicator light flashes until the
speakerphone succeeds in connecting
to a paired device.
To switch off, press and hold the answer/
end key until the red indicator light is
briefly displayed.