Filter
Top Products
ENGLISH
2. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
3. Select the headset from the list of
found devices.
4. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
phone once.
If the pairing is successful, the
headset beeps and appears in the
phone menu where you can view the
currently paired Bluetooth devices.
To disconnect the headset from your
phone, switch off the headset or
disconnect it in the Bluetooth menu of
your phone.
To connect the headset to your phone,
make the connection in the Bluetooth
menu of your phone. To set your
phone to connect with the headset
automatically when the headset is
switched on, change your paired
device settings in the Bluetooth menu.
Basic use
Wear the headset
Slide the headset around your ear, and
point it toward your mouth (8).
Change the cover
To remove the current cover, lift it
from the headset starting from the
microphone end (9). To attach a new
cover, carefully press it into place (10).