Filter
Top Products
ENGLISH
from the device, as you may damage
the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
headset (7). The indicator light is
on while charging. It may take a
while before charging starts. If
charging does not start, disconnect
the charger, plug it in again, and
retry. Charging the battery fully
may take up to 2 hours 30 minutes.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 10 hours of talk-time or up to
200 hours of standby time. However,
the talk and standby times may vary
when used with different mobile
phones or other compatible Bluetooth
devices, usage settings, usage styles,
and environments.
When battery power is low, the
indicator light flashes quickly.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the indicator
light is displayed.
To switch off, press and hold the
multifunction key until the indicator
light briefly flashes several times and
turns off.
Pair the headset
1. Ensure that your phone is switched
on and that the headset is
switched off.
2. Press and hold the multifunction
key (for about 8 seconds) until the
indicator light is continuously
displayed.