Filter
Top Products
5
is on while charging. It may take
a while before charging starts. If
charging does not start, connect
the charger again and retry.
Charging the battery fully may
take up to 2 hours.
3. When the battery is fully
charged, the red indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has power
for up to 5 hours and 30 minutes of
talk-time or up to 150 hours of
standby time. However, the talk and
standby times may vary when the
headset is used with different
mobile phones or other compatible
Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the
headset sounds a series of beeps,
and the red indicator light starts to
flash.
Switch the headset on or off
To switch on, press and hold the
power key until the green indicator
light starts to flash.
To switch off, press and hold the
power key until the red indicator
light is displayed briefly.
Pair the headset
1. Switch on your phone and the
headset.
2. Activate the Bluetooth feature
on the phone, and set the phone
to search for Bluetooth devices.
3. Select the headset from the list
of found devices.
4. Enter the Bluetooth passcode
0000 to pair and connect the
headset to your phone. In some
phones you may need to make
the connection separately after
pairing. You only need to pair
the headset with your phone
once.
9201029_BH-201_1_en.fm Page 5 Thursday, January 25, 2007 4:15 PM