Filter
Top Products
7
Call handling
To make a call, use your phone in
the normal way when the headset
is connected to your phone.
If your phone supports last
number redialling with the
headset, press the multifunction
key twice while no call is in
progress.
If your phone supports voice
dialling with the headset, press
and hold the multifunction key for
about 2 to 3 seconds until the
phone start voice dialling, and
proceed as described in the user
guide of the phone. Voice dialling
cannot be used during a call.
To answer or end a call, press the
multifunction key. To reject an
incoming call, press this key twice.
To adjust the headset volume
during a call, press either volume
key.
To switch the call between the
headset and a compatible phone,
press and hold the multifunction
key for about 2 to 3 seconds.
Clear settings or reset
To delete the pairings from the
headset, switch on the headset,
and press and hold the
multifunction key and the volume
up key for about 5 seconds until
the indicator light alternates
between red and green.
To reset the headset if it stops
functioning, although it is
charged, press and hold the
multifunction key, and plug the
headset into a charger.
Troubleshooting
If you cannot connect the headset
to your compatible phone, check
that the headset is charged,
© 2007 Nokia. All rights reserved.