Filter
Top Products
Get started
6
■ Charge the battery
This device has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device as you may damage the
device.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the headset.
The red indicator light is displayed during
charging. If charging does not start,
disconnect the charger, plug it in again,
and retry. Charging the battery fully may
take up to 2 hours.
3. When the battery is fully charged, the red indicator light turns off.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 6 hours of talk-time or up
to 160 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles, and environments.
When battery power is low, the headset beeps, and the red indicator
light starts to flash.
■ Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
green indicator light is displayed briefly. When the headset is connected
to a paired phone and is ready for use, the blue indicator light flashes
slowly. If the headset is not connected to a phone, the green indicator
light flashes slowly.
To switch off, press and hold the power key. The headset beeps, and the
red indicator light is displayed briefly.
■ Pair the headset with a compatible phone
1. Switch on your phone and the headset.