Filter
Top Products
14 Headset
15 Clip
Charge the battery
Before using the headset, you must charge the battery.
When the battery charge is low, the headset beeps every 5 minutes, and
flashes on
the display. When the battery is charging, the indicator light is on.
1 Plug the charger into a wall outlet.
2 Connect the charger cable to the micro-USB connector on the headset. The
indicator light goes off when the battery is fully charged.
3 Unplug the charger from the headset, then from the wall outlet.
When you unplug a charger, hold and pull the plug, not the cord.
The fully charged battery has power for up to 7 hours of talk time, up to 7 hours of
music playing time, or up to 150 hours of standby time.
Check the battery level
Press
. The battery level is shown on the display.
There is enough power.
You may need to recharge the battery soon.
Recharge the battery.
Switch the headset on
Press and hold
for 2 seconds. The headset automatically connects to the last
connected device. If you've never paired your headset with a device, or you've cleared
the pairings, pairing mode is switched on.
4