Filter
Top Products
ENGLISH
device to also play music through the
headset.
If your mobile device does not support
the A2DP profile, you can separately
pair the headset with the mobile
device and a music player that
supports this profile. If you have
paired and connected the headset
with your mobile device, disconnect
the headset from it before pairing the
headset with the music player.
1. Ensure that your mobile device or
music player is switched on and
the headset is off.
2. Press and hold the power key (for
about 5 seconds) until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices.
4. Select the headset from the list of
found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device. If your
device does not have a keypad, it
may use this passcode by default.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to
your device and is ready for use, the
blue indicator light flashes slowly.
You can pair the headset with up to
eight devices but connect it to only
one device supporting the HFP profile
and another device supporting the
A2DP profile at a time.
To manually connect the headset to
the last used device that supports the
HFP profile (for example, after
connection loss), switch the headset
off and on, or press and hold the