Filter
Top Products
ENGLISH
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device, as you may damage
the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector. The indicator
light is on while charging. It may
take a while before charging starts.
If charging does not start,
disconnect the charger, plug it in
again, and retry. Charging the
battery fully may take up to
2 hours 30 minutes.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 7 hours and 30 minutes of
talk-time or up to 140 hours of
standby time. However, the talk and
standby times may vary when used
with different mobile phones or other
compatible Bluetooth devices, usage
settings, usage styles, and
environments.
When battery power is low, the
indicator light flashes quickly.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the indicator
light is displayed.
To switch off, press and hold the
multifunction key until the indicator
light briefly flashes several times and
turns off.
Pair the headset
1. Ensure that your phone is switched
on and that the headset is
switched off.