Filter
Top Products
6
Copyright © 2010 Nokia. All rights reserved.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect
it to only one device at a time.
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode, and
the green indicator light starts to
flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off, and press and hold
the multifunction key for about 5
seconds until the green indicator
light starts to flash quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices. For details,
see the user guide of your mobile
device.
4. Select the headset from the list
of found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
device. In some devices, you may
need to make the connection
separately after pairing.
When the headset is connected to
your device and is ready for use, the
green indicator light flashes slowly.
To manually connect the headset to
the last used device, press and hold
the multifunction key for about 2
seconds, or make the connection in
the Bluetooth menu of your device.
You may be able to set your device
so that the headset connects to it