Filter
Top Products
5
Charge the battery
The headset has an internal,
nonremovable, rechargeable
battery. Do not attempt to remove
the battery from the device, as you
may damage the device.
1. When the back of the headset is
facing you, detach the earloop
from the left of the headset.
2. Connect the charger to a wall
outlet.
3. Connect the charger cable to the
charger connector (7). The red
indicator light is on while
charging. It may take a while
before charging starts. If
charging does not start,
disconnect the charger, plug it in
again, and retry. Charging the
battery fully may take up to 1
hour and 30 minutes.
4. When the battery is fully
charged, the indicator light
turns green. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has power
for up to 6 hours and 30 minutes of
talktime or up to 150 hours of
standby time. However, the talk and
standby times may vary when used
with different mobile phones or
other compatible Bluetooth
devices, usage settings, usage
styles, and environments.
When battery power falls low, the
headset beeps and the red indicator
light starts to flash.
Switch the headset on or off
To switch on, press and hold the
power key until the headset beeps
and the green indicator light is
displayed.