Filter
Top Products
40 V85 Desktop VoIP Phone User Guide
YML772 Rev1
Appendix B: V85 Status and Error Messages
Message Indicates
SIP (number)
Date Time
V85 is working OK, is registered on a SIP proxy server and ready
for outgoing/incoming calls. The number inside brackets () is the
IP phone number.
SIP (Proxy Off)
Date Time
V85 will only operate in Peer-to-Peer Call mode. In this mode,
if you want to make a call you need dial the remote party’s IP
address instead of their phone number.
Registering (number)
Date Time
The IP Phone is configured to be registered in a SIP proxy server,
but has not yet registered successfully or registration has failed.
When the “Registering” message is displayed, calls cannot be
made. Please check your SIP proxy server and traversing firewall
setting.
RegFail (Failed Message)
Date Time
This shows that attempt to registered with SIP proxy server has
been unsuccessful; check your SIP account details such as User
name, password, and Auth I.D.
DHCPFail (number)
Date Time
Phone is configured to use DHCP to get an IP address, but the
DHCP procedure failed (either cannot find a DHCP server or the
DHCP server has rejected the IP assignment). In this case, you
cannot make any calls or hear a dial tone.
Note: The IP phone will continue to try to get an IP address from
the DHCP server, and if the DHCP server responds, the DHCPFail
() display will disappear.
PPPoE FindFail (number)
Date Time
IP Phone is set to use the PPPoE method for network connection,
but is having problems in finding the PPPoE server. Check
network connections
PPPoE AuthFail (number)
Date Time
The IP Phone is set to use the PPPoE method for network
connection, but there is a problem with the PPPoE account
settings. This means that the IP phone is configured to use PPPoE
to get an IP address, but the PPPoE server has refused the
connection because the username/password is not correct. Please
check your PPPoE account username and password.
FWD(number)
Date Time
IP Phone is working OK, calls will be forwarded to the
“Immediate Forward Number” you have specified in your settings.