Filter
Top Products
70
FACE LAYOUT
1 CALL INDICATOR LAMP
Lamp at top corner of Dterm Display flashes when a
call terminates to the terminal. Lamp lights steadily
when a message has been left.
2 LCD(NOTE1)
Liquid Crystal Diode (LCD) display provides Dterm
activity information plus date, time and Soft Key
Operation. The LCD display has 24-character, 3-line
capability.
3 E
XIT
The user can escape from the Help key mode by
pressing this key.
4 SOFT KEYS
Any feature shown at the bottom of the LCD display is
available. The appropriate feature key is displayed on
the screen according to the call handling process.
5 HELP
Explanations of the Soft Keys can be called up on the
LCD display by pressing this key.
6 PROGRAMMABLE KEYS
[Programmable by telephone system administrator
(Flexible Line/Feature Keys)]
• Station line access
• Trunk line access
• Feature access
[Programmable by user (Flexible Line/One-Touch
Speed Dial)]
<Flexible Line>
• Station line access
• Trunk line access
• Feature access
<One-Touch Speed Dial> (Note 2)
• Any feature can be assigned.
• Direct station selection
• Station speed dial
7 RECALL
Press key to terminate established call and return to the
internal dial tone.
8 FEATURE
Used to activate terminal setup functions and to
program One-Touch Speed Dial/Feature Keys.
9 DIRECTORY (NOTE 3)
Press key to activate speed calling – system feature.
10 MESSAGE (NOTE 3)
Press key to access the voice mail system.
11 MIC
Press key to respond hands free. LED on this key lights
during speakerphone operation.
12 CONF
Press key to establish a three-way conversation. LED
on key lights when key is active.
13 LNR/SPD (LAST NUMBER CALL/SPEED CALLING)
Press key to activate redial feature. Press redial and
scroll back through numbers that have been dialed until
the desired number is displayed. Press the ❉ or # (Note
4) key to activate dialing.
*NEC-405 NEAX2400 UG #2 1/22/03 2:43 PM Page 70