NCT Group i30sx Telephone User Manual


 
11
Turning Your i30sx Phone On/Off
When Charging Battery
Turning Your
i
30
sx
Phone On/Off
NOTE: To register for the first time on the Nextel National Network, you
must turn on your
i
30
sx
phone in your local calling area.
To power the phone on:
If your display reads No Service or doesn’t change to the idle screen when you
turn on your phone, and you know you are in a Nextel coverage area, contact
Nextel Customer Care. For details on Nextel coverage areas, go to nextel.com.
Icon
Display
efgh
1 flashing bar 1 flashing bar,
1 continuous bar
1 flashing bar,
2 continuous bars
3 continuous bars
Battery
Strength
Low
Battery
31% to
60%
61% to
90%
Fully
Charged
1
For optimal signal strength, extend the antenna.
2
Press and hold p near the bottom of the phone until the status light
glows red, a tone briefly sounds, and Powering On displays.
3
If you have enabled your SIM PIN security feature (see “Enabling/
Disabling the PIN Security Feature” on page 14), the Enter SIM PIN
Code screen displays. Enter your SIM PIN (see “Entering the SIM
PIN” on page 16).
Press C under OK.
4
As your phone connects to the Nextel
National Network, you will see Welcome
To Nextel and a connecting message.
When the idle screen appears on the
display as shown here, you are ready to
use your i30sx phone!
O