miniVox-MV100 Setup Instructions
1 Connect the USB cable to the miniVox and plug the other end
into the USB port of the computer. The red LED should light up,
indicating the device is ready for use.
2 Run your favorite IM or Voice over IP software and enable the
talk feature.
See Diagram 1.
Adjusting Speaker and Microphone Volumes
1 Open the Windows volume control panel
2 Go to Options Menu, then select Properties
3 Select “USB Audio Device” as the Mixer Device
4 To adjust speaker volume, select Adjust Volume for Playback,
and adjust to your preferred setting
5 To adjust microphone volume, select Adjust Volume for
Recording, and adjust to your preferred setting
Note: Some IM and online meeting programs have much higher output
speaker levels than others. If the volume is too high, the sound might
be distorted. In this case, adjust the speaker volume lower to a more
comfortable level.
2