Filter
Top Products
5
English
MICROPHONE CONNECTION
• For optimum performance, the microphone should be located at least 75
cm from the Genius main unit and 40-50 cm from the driver’s mouth. Make
sure that the holes of the microphone are directed towards the driver and
not towards the Genius main unit.
• Place the microphone on its location using V
elcro.
• Use the supplied clips to guide the microphone cord.
• Insert the microphone plug into the socket of the Genius main unit holder
.
• By default, the button on the microphone is in OUT
-position (unpressed
position). Only for some telephones it is necessary to put the button in the
ON-position.
ADJUSTMENT OF THE PHONE HOLDER
• Turn the big screw in the centre of the main unit holder to the left to make
movements possible.
• Put the main unit holder in the preferred position.
• Fasten the big screw to the right to fix the main unit holder in the preferred
position.
Warning: Do not move the main unit holder without unfastening the big screw.
This will damage the fixation rubber inside!
CONNECTING A CONNECTOR TO THE GENIUS MAIN UNIT
• Take the Genius main unit of the Genius main unit holder
.
• Connect the Genius connector to the Genius main unit.
• Place the Genius main unit back on the main unit holder
.
M_Genius_GB_2.pmd
21.03.2005, 11:53
5