11
To leave a message without ringing an extension
1. Press , then the dial pad key on which the Leave Word Calling
feature is administered
OR, dial the Leave Word Calling access code.
2. Dial the extension.
Message light goes on at the called telephone (if so equipped).
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX subscriber.
1. Press (while off-hook), then the dial pad key on which the
Leave Word Calling Cancel feature is administered
OR, dial the Leave Word Calling cancel code (while off-hook).
2. Dial the extension.
The Send All Calls feature temporarily sends all your calls to another
extension in the same system.
Note: Before you can use this feature, your system manager must provide a
coverage path for your extension.
To send all calls (except priority calls) immediately to coverage
1. While on-hook, press , then the dial pad key on which the
Send All Calls feature is administered
OR, dial the Send All Calls access code (while off-hook).
[confirmation tone]
To cancel Send All Calls
1. While on-hook, press again, then the dial pad key on which
the Send All Calls feature is administered
OR, dial the Send All Calls cancel code (while off-hook).
[confirmation tone]
The Whisper Page feature allows you, if you have the appropriate
permissions, to make an announcement to a person at another extension
currently on another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
Note: The M10L-8400 is the only modular base unit that should be plugged
into the Handset jack on the 6400 Series telephones. If other modular
base units are used, the Whisper Page announcement may be
overheard by the other person on the call.
To make an important announcement (such as an incoming call) to
someone at another extension busy on another call
1. Lift the handset and press . Then press the dial pad key on
which the Whisper Page feature is administered
Send All Calls
Whisper Page
Feature
Feature
Feature
Feature
Feature