Filter
Top Products
-1-
ABOUT YOUR PHONE
The Mitel Networks 4025 phone has ten fixed-function keys ( SUPERKEY,
TRANS/CONF, REDIAL, MESSAGE, HOLD, CANCEL, SPEAKER,
MICROPHONE, and ) three softkeys, and 14 personal keys with built-in
status indicators. The personal key on the bottom right is always your Prime
Line; the remaining personal keys can be programmed as:
!
Feature keys (for example, Swap ). You can program feature keys from
your phone. Your administrator can also program feature keys.
!
Speed Call keys. You can program speed call keys from your phone.
!
Line Appearances. Only the administrator can program line appearances.
Your telephone also features display-assisted selection of features, on-hook
dialing, and a large Message Indicator.
Note: When using the SUPERKEY, press CANCEL to back up a menu level.
IMPORTANT NOTE FOR HEADSET USERS:
Mitel Networks headsets with a feature control switch must be installed in the
dedicated headset jack (the jack nearest the front of the phone). Installation
will disable your handset microphone. Disconnecting the headset at the jack
or at the quick-disconnect plug restores handset operation.
Telephone status indicators
When line is: the indicator is:
Idle Off
Busy On
Ringing Flashing slowly
On hold at your phone Flashing rapidly
On hold at another phone Flashing slow on/fast off
About Feature Access Codes
Use of some features requires dialing access codes. The codes are flexible
and may be different than those in this guide. Ask your Administrator for a
list of codes you should use.