Filter
Top Products
5312 and 5324 IP Phone SIP User and Administrator Guide
- 34 -
1. Press
(SUPERKEY), and then press >> until ADMIN TOOLS? appears on the
display.
2. Press OK, and then press ▼ until ACCESS PROTOCOLS? appears on the display.
3. Press OK, enter your administrator password, and then press SUBMIT. HTTP <current
status> appears on the display.
4. Do one of the following:
• To enable HTTP, press TURNON.
• To disable HTTP, press TURNOFF.
• To enable or disable TFTP, press NEXT.
5. Repeat steps 3 and 4 for TFTP, Telnet, SNMP and SRTP. After you enable or disable a
protocol, that protocol and its new status appears on the display.
6. Do one of the following:
• To return to the main menu, press EXIT.
• To return to the default display, press
(SUPERKEY).
SRTP Call Encryption Indicator
For information about the Call Encryption setting, see Call Encryption Indicator on page 7.
Also refer to the Configuring Protocols topic of the Administrator’s Web Configuration Tool
Online Help (see page 7).
Viewing/Modifying the Network Settings
View the IP and MAC Addresses
To view the phone’s IP and MAC addresses:
1. Press
(SUPERKEY), and then press the Line 1 key. The IP and MAC addresses
appear.
2. Press
(SUPERKEY) to return to the default display.
Modifying Network Settings
To modify network settings using the Web Configuration Tool:
• Access the Configuring Network Settings topic of the Administrator's Web Configuration
Tool online help.
To modify network settings using the Superkey Menu Interface
1. Press
(SUPERKEY), and then press >> until ADMIN TOOLS? appears on the
display.
2. Press OK, and then press ▼ until NETWORK SETTINGS? appears.
3. Press OK, enter your administrator password, and then press SUBMIT.
4. Press NEXT until the network configuration settings you want to change appear.