Filter
Top Products
Call Handling
- 23 -
3. Press
(TRANS/CONF). The call put on hold in step 1 is connected to the call in
progress.
Leave a Conference Call
Do one of the following:
• Hang up.
• Press HANGUP softkey (5324 IP Phone only).
• Press
(CANCEL).
Note: Any of the three parties can hang up and the other two parties will remain connected.
Messages - Advisory
An advisory message about your whereabouts appears on your caller's display.
Create an Advisory Message
• Access the Feature Configuration page of the Web Configuration Tool (see Accessing
the Web Configuration Tool on page 7).
Enable/Disable your Advisory Message
To enable or disable an advisory message:
1. Press
(SUPERKEY), and then press >> until FEATURES? appears.
2. Press OK, and then press ▼ until ADVISORY MESSAGES? appears.
3. Press OK. The first of several advisory messages appears.
4. Press
(UP) or (DOWN) to navigate to the desired message.
5. Press TURNON or TURNOFF to enable or disable the message. When turned on, the
Advisory Message key is lit and the chosen advisory message will be displayed in the
LCD.
6. Do one of the following:
• To return to the main menu, press EXIT.
• To return to the default display, press
(SUPERKEY). The advisory message
alternates with the date and time on the default display.
Note: To enable/disable advisory messages using the Web Configuration Tool, access the
tool’s Feature Configuration page (see page 7).
Messaging – Voice Mail
Your Administrator configures your voice mail information so you can receive and access
voice mail messages. The Ring/Message Indicator flashes to indicate waiting messages.
Note: For administrative information on voice mail, see Error! Reference source not
found. on page Error! Bookmark not defined..