Mitel 5224 IP Phone Telephone User Manual


 
-36-
Direct Paging – Handsfree Answerback Disabled
Your administrator enables or disables Handsfree Answerback and you can
also turn it on or off on your phone. To turn Handsfree Answerback off, see
"Direct Paging – Handsfree Answerback Enabled" elsewhere in this guide.
When Handsfree Answerback is disabled on your phone and you receive a
Direct Page, the Direct Page is indicated by a single burst of tone.
To answer Direct Page calls when Handsfree Answerback is disabled:
Phone state before
Page arrives:
To answer the Direct Page (indicated by single
burst of tone):
Phone is idle and MUTE
is OFF.
1. Check that MUTE is ON solid.
2. Lift the handset OR press MUTE key to answer in
Handsfree mode. (The light turns OFF.)
3. Begin speaking.
You are on a handset
call or headset call, and
MUTE is OFF
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid and and you are
now speaking to the paging party and have MUTED your
handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset and handsfree calls.
You are on a MUTED
handset/headset call,
OR, you are on a
Handsfree call
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.