Mitel 5207 Telephone User Manual


 
MITEL Networks 5207 IP Phone
User’s Guide
17
Rev. 012805
To disable the Headset Operation:
Press the Headset feature key
Headset Operation (with Feature Control Switch)
IMPORTANT NOTE: Mitel Networks Headsets with Feature Control Switch must be
installed in the dedicated headset jack (the jack nearest the front of the set). Installation
will disable your handset microphone. Disconnecting the headset at the jack or at the
quick-disconnect plug restores handset operation. If handset operation is required for an
extended period of time, you should press the Headset feature key to return the telephone
to handset mode.
To enable Headset Operation
Press the Headset feature key
To answer a call:
Press the flashing line appearance key
-OR-
Quickly press and release the headset’s feature controls switch
To mute the headset microphone:
Press and hold the headset’s feature control switch.
To hang up:
Press CANCEL
-OR-
Quickly press and release the headset’s feature control switch
To disable the Headset Operation:
Press the Headset feature key