Filter
Top Products
Getting Started, continued
Charging the NiMH Battery Pack, continued
1. Plug the AC adapter cable in the adapter jack located on the rear of the
charger, then into an AC outlet.
2. Slide the NiMH battery pack (or the radio equipped with a NiMH battery
pack) into the charging slot.
3. Ensure that the metal contacts on the battery pack come in contact with
the charging terminals.
4. When charging the NiMH battery pack alone, insert the provided plastic
spacer (stored in charger base) into the charging well, then insert the
battery pack.
5. The charger LED will light to advise that charging has begun. Charge the
standard battery pack for 9 hours. THEN REMOVE THE PACK OR
RADIO FROM THE CHARGER.
I IMPORTANT NOTE:
The ACC-480 standard charger DOES NOT TURN
OFF AUTOMATICALLY after the charging cycle has
been completed. Damage to the battery or reduced
battery life may result if charged in excess of the
recommended charging time.
NOTE: After recharging the battery pack, REMOVE IT FROM
THE CHARGER. Charging the battery pack for more than 5
days may reduce the battery life.
The battery pack life is over when its operating time
decreases even though it is fully and correctly charged.
10
95
Arbol de Menú de Opción del Sistema -
Cierre Ocupado del Canal
(oprima MODE, a continuación oprima el botón ascendente o
descendente para la opción)
(oprima MODE, a continuación oprima el botón ascendente o
descendente para el menú deseado)
(oprima MODE, a continuación oprima el botón ascendente o
descendente para la selección)
(Oprima MODE para graduar la selección)
Arbol de Menú de Opción del Sistema -
Reposo Marcado
(oprima MODE, a continuación oprima el botón ascendente o
descendente para la opción)
(oprima MODE, a continuación oprima el botón ascendente o
descendente para el menú deseado)
(oprima MODE, a continuación oprima el botón ascendente o
descendente para la selección)
(Oprima MODE para graduar la selección)