Filter
Top Products
VOX will be more sensitive on the “1” setting than on the “3” setting.
To turn VOX off, press the MENU button until the display shows
“VOX” blinking while on the right of the CHANNEL NUMBER display,
a “1”,“2” or “3” icon appears. Select “oF” by pressing the
s
\
t
buttons and push the PTT key, or press MENU button again to move
to the next feature setting.
VIBRATE ALERT
To turn the VIBRATE ALERT on, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the
right of the CHANNEL NUMBER, an “oF” icon appears. Select “on”
by pressing the
s
\
t
buttons and push the PTT button, or press
MENU button again to move to the next feature setting. The
VIBRATE ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the
right of the CHANNEL NUMBER, an “on” icon appears. Select “oF”
by pressing the
s
\
t
buttons and push the PTT button, or press
MENU button to move to the next feature setting. The VIBRATE
ALERT icon will go off.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the
s
\
t
buttons and
push the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“on” icon appears. Select “oF” by pressing the
s
\
t
buttons and
push the PTT key, or press MENU button to move to the next feature
setting.
CALL ALERT SELECTION
Your LXT480 Series has 5 selectable CALL ALERTS.
To select, press the MENU button until a “CA” icon appears and to
the right of the “CA” icon the current CALL ALERT setting is
displayed. Then press the
s
\
t
buttons to make the CALL ALERT
selections - the radio will emit a corresponding tone for each
selection. To confirm, press the PTT button or press MENU button to
move to the next feature setting.