Filter
Top Products
®
Page 9 www.midlandradio.com
LXT460 SERIES QUICK REFERENCE CHAR
T
MONITOR
Pressing and holding the MONITOR button for 3 seconds will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This could also be used to check any activity on
your current channel before transmitting.
Press and hold the MONITOR button for 3 seconds again to get out
of MONITOR mode.
SCAN
Your LXT460 Series can scan all 28 channels for activity. To enter,
quickly press the SCAN button. Repeat the same procedure to exit.
Your radio will rapidly scan each of the 22 channels and stop on any
active channel for 4 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCAN button.
CALL
ALERT
Your LXT460 Series can transmit a call alert for a fixed length of time.
To send a call alert, press the CALL button. The TX icon will appear
while transmitting a call alert and a tone can be heard on the speaker
for confirmation.
KEYP
AD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 4 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
Model LXT460 Series
MENU
Channel
VOX
1~28
Privacy
Roger Beep
On/Off
Power
H/L
Call Alert
1~5
Vibrate
On/Off
WX Channel
1~10
Press Menu
button during
WX Scan
Silent Operation
On/Off
oF/1/2/3
CTCSS
DCS
oF~38
oF~83
WX Alert
On/Off
WX Band
On/Off
WX Scan
1~10
Press and hold UP
button for 5 seconds