Filter
Top Products
®
Page 10 www.midlandradio.com
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the buttons to select one
of the 22 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SET
TING PRIVACY CODES
Your LXT320/420 Series has 121 Privacy Codes available. The
selected Privacy Code may be different for each channel. To select a
Privacy Code for the current channel press the MENU button twice,
and then the buttons to select one of the 38 CTCSS Privacy
Code. Press again the MENU button and the button to select one
of the 83 DCS Privacy Code. The Privacy Code icon on the display
will indicate whether you set your Privacy Code in CTCSS or DCS
mode. To confirm the selection, press the PTT button or press MENU
button again to move to the next feature setting.
Note : If you select any CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two LXT320/420 Series radios,
all radios in your group must be set to the same channel
and Privacy Code selections.
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT320/420 has 2 power level settings. To select the power level
on channels 1~7 and 15~22, press the MENU button until a “Pr” icon
will appear blinking on the display. Then press the buttons to select
TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the
PTT button or press MENU button again to move to the next feature
setting. When the PTT button is pressed during Low Battery Level
condition, the TX Power will automatically switch from Hi(H) to
Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
/
Model LXT320/420 Series
/
!
/
!
/